WIND
WIND CONES: type 806
Type 806, Size 1, Externally Lighted:
PWC-8061L-x-ON-FF-D-L
- Frangible Pole, 8-ft (2.5m) by 18-in Windsock*
- For any land-based heliport especially for roof mounting
* Also typical for ICAO Sizes 4 & 5
Type 806, Size 1, Internally Lighted:
PWC-8061L-1-ON-FF-B
- Frangible Pole, 8-ft (2.5m) by 18-in Windsock*
- For any land-based heliport especially for roof mounting
* Also typical for ICAO Sizes 4 & 5
Type 806, Size 1, Solar Powered:
PWC-8061L-1-ON-FF-B-SOL
- Frangible Pole, 8-ft (2.5m) by 18-in Windsock*
- For any heliport or helideck without available AC power
* Also typical for ICAO Sizes 4 & 5
Type 806, Size 1, Externally & Internally Lighted:
PWC-8061L-x-ON-FF-C
- Frangible Pole, 8-ft (2.5m) by 18-in Windsock*
- For any heliport or helideck without available AC power
* Also typical for ICAO Size 5
Type 806, Size 1, Fiberglass Pole:
PWC-8061L-x-ON-FF-D-L-LIR
- Frangible Pole, 8-ft (2.5m) by 18-in Windsock*
- For any land-based heliport; may be internal or external
* Also typical for ICAO Size 5
WIND CONES: type 807
Type 807, Size 1, Externally Lighted:
PWC-8071L-x-ON-HBA-D-L
- Rigid Hinge-Based Pole, 8-ft (2.5m) by 18-in Windsock*
- For any land-based heliport at ground level
* Also typical for Size 2 & ICAO Size 5
Type 807, Size 1, Internally Lighted:
PWC-8071L-1-ON-HBA-B
- Rigid Hinge-Based Pole, 8-ft (2.5m) by 18-in Windsock*
- For any land-based heliport at ground level
* Also typical for Size 2 & ICAO Size 5
Type 807, Size 1, Solar Powered:
PWC-8071L-1-ON-HBA-B-SOL
- Rigid Hinge-Based Pole, 8-ft (2.5m) by 18-in Windsock*
- For any land-based heliport at ground level without available AC power
* Also typical for Size 2 & ICAO Size 5
Type 807, Size 1, Externally & Internally Lighted:
PWC-8071L-x-ON-HBA-C
- Rigid Hinge-Based Pole, 8-ft (2.5m) by 18-in Windsock*
- For any land-based heliport at ground level
* Also typical for Size 2 & ICAO Size 5
Type 807, Size 1, Wall-Mounted:
PWC-8071L-1-ON-WM-B
- Rigid Hinge-Based Pole, 8-ft (2.5m) by 18-in Windsock*
- For any land-based heliport at ground level
* Also typical for Size 2 & ICAO Size 5
Hazardous area
Hazardous Area Class I, Division 2 (Zone 2):
PWC-8061L-2-ON-EX
- Stainless Steel Pole, 8-ft (2.5m) by 18-in Windsock*
- For any location with this hazardous atmosphere classification
* Also typical for Sizes 2, 4 & 5
Hazardous Area ATEX & IECEx Zone 2:
PWC-8061L-2-ON-AX2
- Stainless Steel Pole, 8-ft (2.5m) by 18-in Windsock*
- For any location with this hazardous atmosphere classification
* Also typical for Sizes 2, 4 & 5
Hazardous Area ATEX & IECEx Zone 1:
PWC-8061L-2-ON-AX
- Stainless Steel Pole, 8-ft (2.5m) by 18-in Windsock*
- For any location with this hazardous atmosphere classification
* Also typical for Sizes 2, 4 & 5
Get In Touch
Point Lighting Corporation personnel will assist customers and their agents in the design of lighting layouts, equipment selection and specifications. In all cases, this represents our interpretation of applicable standards and common practices. No fee is charged for these opinions. Final equipment selection is the responsibility of the end user and to comply with all applicable laws and codes and to ensure proper installation.
